Contractor Safety Share

Sharing safety information

Tight Quarters Causes Problem

The worker was in the process of installing ceiling wire.  He was using a "Hilti Gun" with a 12 foot extension pole to shoot into the concrete deck above.  After installing a wire in a corner section of the room, he lowered his arm and came into contact with electrical wire mold that was mounted on the wall.  This caused injury to his elbow.

Factors to consider at your site and/or project include, but not limited to the following:

Be aware of your surroundings (sharpe edges, slippery spots, etc.).
Communicate situations that cause an injury or that could cause and injury.

Consider this example as you complete today’s work activities.

Safety Flash Action Items:
  • Date Contractor Safety Flash posted for all employees to review: _______________
  • Safety Talk meeting date: _______________
  • Full employee attendance and participation at safety meeting to review this incident (documentation required).
  • Employees understand urgency in protecting themselves and others.
  • Supervisors and Employees are clear which items shared in this Safety Flash are mandatory.
  • Employees/Supervisors will focus on recommended actions during future work activities of a similar nature.
Contract Firm Management Rep Signature____________________

THINK about the hazards associated with your particular work, and the steps that can be taken to increase safety on your job.
If you have questions about this CONTRACTOR SAFETY FLASH, please contact [email protected]


Comments are closed